Fire-Rated Joints & Penetrations

Vortexen საქართველოში უზრუნველყოფს სერვისს „Fire-Rated Joints & Penetrations“ მკაფიო მოცულობით, ტექნიკური მტკიცებულებითა და პასუხისმგებლობით. სისტემა, კვალიფიკაცია და შესრულების გზა დასტურდება ვალდებულების აღებამდე.

ტექნიკური მოცულობა

Linear construction, curtain wall perimeter, and dynamic movement joint firestops.

Linear construction and dynamic expansion joints require specialized firestop systems engineered to accommodate structural deflection, thermal movement, and seismic drift while maintaining full fire-resistance ratings.

Static sealants installed in moving joints inevitably split, delaminate, and fail under cyclic strain. Certified joint systems must demonstrate movement capability (Class I, II, or III cycling under UL 2079, ASTM E1966, or EN 1366-4) before and during fire testing.

Vortexen coordinates floor-to-floor, floor-to-wall, wall-to-wall, head-of-wall deflection joints, and slab-edge curtain wall perimeter fire containment, matching compressed mineral wool safing and sprayable elastomeric membranes to declared joint movement percentages.

MovementDeclared

OpeningMeasured

InterfaceCoordinated

01 / Buyer outcome

What this route should produce

Joint and penetration responsibility matrix
Reduced interface gaps between trades
Movement and service conditions recorded
Clear deviation and assessment route

02 / საჭირო მონაცემები

What we need to qualify it

Joint type and movement
Barrier type and rating
Service inventory
Opening dimensions
Existing condition
Construction sequence

01 / Scope

What the route can cover

Head-of-wall deflection joints beneath fluted metal decks
Floor-to-floor and wall-to-wall seismic expansion joints
Curtain wall slab-edge perimeter fire containment (ASTM E2307)
Class I, II, and III cyclic movement joint assemblies (UL 2079 / ASTM E1966)
High-density compressed mineral wool safing insulation
Sprayable water-based and silicone elastomeric firestop coatings
Joint width, movement percentage, and barrier rating coordination
Quality assurance inspection logging and movement verification

02 / შესრულების გზა

How work moves forward

Separate joint and penetration schedules
Record movement and service geometry
Map system and deviation routes
Coordinate trade sequence
Install, inspect and track closure

03 / საჭირო მტკიცებულება

What buyers should expect

Joint or penetration system detail
Movement or opening record
Deviation register
Location-level close-out

Commercial and technical guardrails

What this route refuses to hide.

Fast progress is valuable only when assumptions, responsibility and limitations remain visible to the buyer and delivery team.

01No static sealant in a movement joint without evidence
02No mixed penetrant omission
03No unsupported oversized opening
04No hidden deviation at close-out

გაგზავნეთ მოცულობა, ნახაზები და გადაწყვეტილების ვადა.

გაგზავნეთ პროექტის მოთხოვნა ↗