Farby pęczniejące

Vortexen realizuje zakres „Farby pęczniejące” dla projektów w Polsce poprzez jasno określony zakres, dokumentację techniczną i przypisaną odpowiedzialność. System, kwalifikacje i droga wykonania są potwierdzane przed zobowiązaniem.

Zakres techniczny

Thin-film architectural and structural steel fireproofing with verifiable DFT.

Intumescent coatings provide thin-film, profile-following fire protection for exposed structural steel where architectural aesthetics, clean lines, and minimal dead weight are critical design priorities.

Under high temperatures, the coating expands up to 50 times its original dry film thickness, generating a robust insulating carbonaceous char that insulates load-bearing steel against critical failure temperatures (typically 550°C for beams and 500°C for columns).

Vortexen coordinates solvent-borne and water-borne systems for 30 to 120-minute cellulosic fire exposure. Each member is calculated from exact section factor geometry (Hp/A or A/V), substrate primer compatibility, and environmental application conditions (temperature ≥ 3°C above dew point, relative humidity ≤ 85%) with calibrated magnetic/electromagnetic dry film thickness (DFT) verification.

DesignSection factor

ApplicationDFT-led

SystemCompatible build-up

01 / Buyer outcome

What this route should produce

Manufacturer-based thickness schedule
Visible primer and topcoat compatibility
Layer and environment records
Final DFT and rectification report

02 / Wymagane dane

What we need to qualify it

Steel schedule and geometry
Required rating
Critical temperature
Primer system
Environment and exposure
Architectural finish

01 / Scope

What the route can cover

Architecturally exposed structural steel (AESS)
Internal and semi-exposed columns, beams, and hollow sections
Solvent-borne systems for fast curing and semi-exposed service
Water-borne acrylic systems for enclosed and occupied spaces
Section factor (Hp/A and A/V) calculation and thickness schedules
Anti-corrosive primer compatibility and approved decorative topcoats
Systematic magnetic/electromagnetic dry film thickness (DFT) gauge surveys
Repair and reinstatement of damaged coating areas

02 / Ścieżka realizacji

How work moves forward

Validate approved system and thickness schedule
Inspect surface and primer
Control temperature, humidity and dew point
Apply in measured coats
Inspect DFT, repair defects and close out

03 / Wymagane dowody

What buyers should expect

Approved product and system data
Thickness schedule
Environmental logs
Wet- and dry-film inspection records

Commercial and technical guardrails

What this route refuses to hide.

Fast progress is valuable only when assumptions, responsibility and limitations remain visible to the buyer and delivery team.

01No generic DFT assumption
02No application over unknown primer
03No accelerated recoating outside limits
04No unrecorded site repair

Wyślij zakres, rysunki i termin decyzji.

Wyślij zapytanie projektowe ↗